| Quote cart is empty. |
- Bag (FIBC) Frames
- Bins (IBCs) - Powders/Tablets
- Bins (IBCs) / Kegs for Liquids
- Blenders
- Cleaning Systems
- Coaters
- Compensators
- Conveyor Systems
- Dispensing Systems
- Drum Equipment
- Drum Handlers
- Drums
- Flanges
- Flexible Containment
- Funnels & Flow Aids
- Granulation Equipment
- Granulation Systems
- Lifters
- Mobile Weighing
- Pallet Jacks
- Pallets
- Powder Transfer Systems
- Valves
- Vessels
Bins (IBCs) for Liquids
IBC for Liquids - Type IBCz
IBC for liquids in Galvanized or Stainless frame type
Application:
Transport and storage of liquid materials for the food, chemical, paint, plastics and food industries.
500-1,250 liters
Materials and Finish:
Non-polluting reusable container made of stainless steel 304, 316 or 316L.
Flush ground internal seams to any Ra value polish (Ra 15 µ-inch is typical).
Super-secure, sanitary hinged twist knob manway, or one-piece clamping band design. Seals per FDA, USDA or chemical resistant (per application).
Outlet valve per requirement: Sanitary tri-clamp or flange outlet
Handling:
- Transportable with all commercial industrial trucks
- Lifting Loops for cranes (spreader bar)
- Stackable
Advantages:
- Optimized cleaning geometry
- Complete emptying of container due to deep drawn base with no dead storage capacity
- Continuous forklift channels for the safe forklift transport
- Diagonal feet ensure an optimized spread of weight of the filled container on the frame
- Positive force transmission between tank and feet prevent slipping of tank within the frame (e.g. while cleaning or stirring application)
Approvals:
UN-approved in compliance with Chapter 6.5 of ADR/ RID, IMDG Code concerning transport of dangerous liquids of packaging groups II and III, Chapter 3.2 of ADR/RID, IMDG-Code (road, rail and sea transport)
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
IBC for Liquids - Type LNZ
High Purity IBC for food stuffs / Pharmaceuticals / Chemicals type LNZ
Application:
The LNZ line of conainers are made for high purity handling to eliminate any chance of cross contamination. From the totally anclosed base legs, to the seamless body design and ultra-clean manway, the LNZ line is the premier choce for aseptic product handling.
Capacity: 66 to 264 Gallons / 250-1,000 liters
Materials and Finish:
Stainless steel 304, 316 or 316L
All welds continuous and ground flush and smooth. Polishing to any Ra value polish (Ra 15 µ-inch is typical).
Manway: Super-secure, sanitary hinged twist knob manway, or one-piece clamping band design. Seals per FDA, USDA or chemical resistant (per application)
Outlet valve per requirement: Sanitary tri-clamp or flange outlet with sanitary butterfly valve, ball valve or diaphragm valve.
Meets 3A dairy requirements
Handling:
- Transportable with all commercial industrial trucks
- stackable (2 high full and 3 high empty)
Advantages:
- Super-clean design, to insure easiest cleaning both inside and out.
- Heavy duty construction - made to last.
- Unique deep drawn bottom with side discharge for 100% discharge
- Optionally with heating or cooling shell Designs for viscous products
- Deep Drawn Bottom - always assured to completely discharge and the BEST for cleaning!
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
IBC for liquids - Type LTP
IBC for liquids with Galvanized or Stainless bottom frame type LTP
Application
Transport and storage of liquid materials for the food, chemical, paint, plastics and food industries.
Capacity: 39-528 Gallons / 150-2,000 liters
Materials and Finish:
Non-polluting reusable container made of stainless steel 304, 316 or 316L.
Flush ground internal seams to any Ra value polish (Ra 15 µ-inch is typical).
Super-secure, sanitary hinged twist knob manway, or one-piece clamping band design. Seals per FDA, USDA or chemical resistant (per application)
Outlet valve per requirement: Sanitary tri-clamp or flange outlet
Handling
- Transportable with all commercial industrial trucks Lifting
- Loops for cranes (spreader bar)
- stackable
Advantages
Crane holes in the frame supports for fixing a lifting beam or for connecting crane eyes
Stackable to save floor space
Removable bottom frame for easy repairing
100% emptying (no dead spots) due to deep drawn (press molded) bottom of IBC.
Forklift damage-protection on frame (to protect the outlet)
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
IBC for Liquids - Type TP
IBC for liquids in Galvanized or Stainless frame type TP
Application:
Transport and storage of liquid materials for the food, chemical, paint, plastics and food industries. Idea for rough handling - road transport applications due to protective frame.
Capacity: 117 - 330 Gallons / 455 -1,250 liters
Materials and Finish:
Non-polluting reusable container made of stainless steel 304, 316 or 316L.
Flush ground internal seams to any Ra value polish (Ra 15 µ-inch is typical).
Manway:
Super-secure, sanitary hinged twist knob manway, or one-piece clamping band design. Seals per FDA, USDA or chemical resistant (per application)
Outlet valve per requirement: Sanitary tri-clamp or flange outlet
Handling:
- Transportable with all commercial industrial trucks
- Lifting Loops for cranes (spreader bar)
- Stackable
Advantages:
- Very Heavy Duty Design, made to last with protected inner tank with robust transport frame - stability by additional cross bracings
- Crane holes in the frame top supports for fixing a lifting beam or for connecting crane eyes
- Welded-on tank feet guarantee a constant weight transmission
- Rubber buffer as vibration dampers and for uncoupling between tank and transport frame
- Tank grounded to frame with grounding strap
- Forklift damage-proctection on frame bottom area (to protect the outlet)
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
IBC for Liquids with Controlled Heating System - Type LNZ-BEI
Electrically Heated IBC for controlled temperature handling of liquids type LNZ-BEI
Deep-drawn cone shaped bottom no seams
Improved outlet shape for better flow
Protective exterior frame with enclosed forklift tunnels
100% emptying - no residue, no waste
Easiest to clean design
On-Board Electrical Package 20˚ - 150˚ C / 68˚ - 330˚ F heating
Application:
Transport, storage & discharge of liquid materials for the food, chemical, pharmaceutical, paint, plastics and food industries.
Capacity:
132 to 330 Gallons / 500 to 1250 liters
Materials:
Product Contacting: 304, 316 or 316L
Frame: 304 stainless or hot dipped galvanized mild steel
* Other materials available upon request
Finish: Interior standard IIB optional polish up to high mirror. Exterior with cleaned welds and strip polished, optional polish up to high mirror. With flush ground welds All finishes can be certified.
Manway: Standard manways 16" or 18" (larger also available). Screw hinge cover for safe opening and air-tight closing. The easy to remove manway lid is offered with many seal materials, and certifications, such as Silicone, EPDM, and NBR.
Top Head Connections: 1" Over/Under pressure valve. We can supply any Vent, Tri-Clamp, or Quick-Connection ports you require.
Bottom: Features our unique 100% deep-drawn, easy to clean bottom (viscous products) or shallow-funnel bottom with angle pipe outlet (easy flowing products).
Outlet with Tri-clamp or any flange style. We can supply our standard sanitary butterfly, ball valve or the valve of your choice.
Handling: 2 or 4 way forklift handling, stack-able guide top corners and Crane lift lugs
Working Pressures: Minimum-Maximum operating Pressures: -2.25/+15 psi (-0.15/+1 Bar)
Approvals:
UN 31A Approved. In compliance with Chapter 6.5 of ADR/ RID, IMDG Code concerning transport of dangerous liquids of packaging groups II and III, Chapter 3.2 of ADR/RID, IMDG-Code (road, rail and sea transport)
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
IBC for Liquids with Controlled Heating System - Type ZBEI
Electrically Heated IBC for controlled temperature handling of liquids type ZBEI
Application:
Transport and storage of liquid materials for the food, chemical, paint, plastics, pharmaceutical and food industries. Idea for rough handling, and high volume production as well as road transport applications due to protective frame.
Capacity: 132 to 330 Gallons / 500 -1,250 liters
Materials and Finish:
Non-polluting reusable container made of stainless steel 304, 316 or 316L.
Flush ground internal seams to any Ra value polish (Ra 15 µ-inch is typical).
Manway: Super-secure, sanitary hinged twist knob manway. Seals per FDA, USDA or chemical resistant (per application)
Outlet valve per requirement: Sanitary tri-clamp or flange outlet
Handling:
- Transportable with all commercial industrial trucks
- Lifting Loops for cranes (spreader bar)
- stackable
Heating System:
Stand alone controller with programmable HMI for precise heating. Features slow heatup to avoid hotspots (burning)
460/3/60 VAC (or 575 volts for Canadian customers)
Electrically traced system in double wall IBC with insulation for surface-burn-safety
Advantages:
- Very Heavy Duty Design, made to last with protected inner tank with robust transport frame
- Totally enclosed outer casing prevents condensate collection from damaging insulation.
- Crane holes in the frame supports for fixing a lifting beam or for connecting crane eyes
- Dual digital temperature sensors provide accurate heating between 68°F and 300° F
- Unique deep drawn bottom with side discharge for 100% discharge
- Forklift damage-proctection on frame (to protect the outlet)
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
MetriCube Container - The Perfect Size Shipping IBC
The MetriCube Container - the perfect size over-the-road shipping container
- 20 units fit into a 20’ ISO container and 40 into a 40’ ISO container - Maximum density!
- Deep-drawn cone shaped bottom no seams
- Optional heated bottom & outlet or full container
- 100% emptying - no residue, no waste
- Easiest to clean design
- Can be customized to your application
- UN 31A Certified
Application:
Transport and storage of liquid materials for the food, chemical, pharmaceutical, paint, plastics and food industries.
Capacity:
264 Gallons / 1000 liters
Materials:
Product Contacting: 304, 316 or 316L
Frame: 304 stainless or hot dipped galvanized mild steel
* Other materials available upon request
Finish: Interior standard IIB optional polish up to high mirror. Exterior with cleaned welds and strip polished, optional polish up to high mirror. With flush ground welds, all finishes can be certified.
Manway: Standard manways 16" or 18" (larger also available). Screw hinge cover for safe opening and air-tight closing. The easy to remove manway lid is offered with many seal materials, and certifications, such as Silicone, EPDM, and NBR.
Top head connections: 2" tri-Sure Bung with pressed out connection. We can supply any Vent, Tri-Clamp, or Quick- Connection ports you require.
Bottom of Body: Features our unique 100% deep-drawn, easy to clean bottom (viscous products) or shallow-funnel bottom with angle pipe outlet (easy flowing products). Outlet with Tri-clamp or any flange style. We can supply our standard sanitary butterfly, ball valve or the valve of your choice.
Handling: 2 or 4 way forklift handling, stack-able guide top corners and crane lift lugs
Working Pressures: Maximum 1.5 psi/ 0.1 bar (can be increased to 4.5 psi on request)
Approvals: UN-31A Chapter 16 for packaging groups II & III. UN Packaging group II & III Liquids
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
Pressure Vessels
For the Highest Requirements...Made to the highest Standards.
Profit from our expertise and many years’ experience in the pharmaceutical industry. Materials, liquids, etc. are transported, as well as stored sterilely and safely, in Bolz Intec pressure vessels. Well- known pharmaceutical companies have trusted Bolz Intec pressure vessels for years. Each container is designed and constructed exactly according to your requirements. GMP-compliant and strictly according to the Pressure Vessel Directive.
Pressure vessel for integration in pharmaceutical process plants are used for the production of suspensions, the storage and transfer of liquids and the storage and transfer of sterile media. Pressure vessels are available in standard and custom volumes. Pressure vessels can be integrated with magnetic mixer in bottom and can be heated using steam.
Application:
Transport and storage and dispensing of liquid materials the highest aseptic / sanitary applications.
Finishing:
Supplied to any range, from mill finish to specified Ra values with profilometer proofing. We can also recommend a finish based on your application. Additionally, our factory specializes in electro-polishing, which we do in house.
Materials of Construction:
316L Stainless Steel - welds continuous and ground smooth. Entire unit polished to a #4 luster, polish grain in uniform directions for a professional look. Optionally hastelloy can be provided.
Seals/Gaskets in PTFE/EPDM/Silicone and per FDA CFR requirements.
Vessels (248 KB) 
Small Hazardous Materials Containers / Kegs - Type HPC
Small Hazardous Materials Containers - Kegs
- High Volume Production...Low Cost...Highest Quality
- UN, DOT & ASME approved
- Robotic TIG welded seams
- Designed for use in a closed loop system
- Heavy duty rolled top and bottom skirting
- Bottom base deep drawn (seamless) with indent for nearly 100% emptying
- Extremely durable
- 3" tri-clamp lid for 100% flexibility (or Tri-Sure Bung)
Application:
Transport, storage and dispensing of liquid materials for the chemical, paint, plastics, fertilizer, pesticide and food industries.
Capacity:
2.6 to 53 Gallons / 10 to 200 liters
Materials:
Product Contacting: 304, 316 or 316L
Base & Top: With welded 304 stainless skirting
* Other materials available upon request
Finish:
Interior electro-polished Exterior with bath-Dipped pickling, optional electro-polish.
Top head connections: All types are possible, standard is a 2" and 3/4" tri-sure bung type with PTFE seal. We can supply every type of fitting you require.
Top & Bottom: Features our unique 100% deep-drawn, easy to clean Top and Bottom.
Working Pressures: Maximum 14 to 87 psi (depends on container see chart)
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
Small Pressure Vessels / Kegs - Type SPV
Small Pressure Vessels
- High Volume Production...Low Cost...Highest Quality
- High Sanitary, long lasting design
- Robotic TIG welded seams
- Small containers with molded rubber bases and handles
- Larger containers with rolled top and bottom skirting
- Bottom base deep drawn (seamless) with indent for nearly 100% emptying
- Extremely durable
- Can be customized to your application
Application:
Transport and storage and dispensing of liquid materials for the food, chemical, paint, plastics and food industries.
Capacity:
1.5 to 59.4 Gallons / 5.7 to 225 liters
Materials:
Product Contacting: 304, 316 or 316L
Base & Hand Grip: Series SPV-216 & 237 provided with vulcanized rubber compound all other series with welded 304 stainless skirting
* Other materials available upon request
Finish: Interior standard IIB optional electro-polish polish Exterior with cleaned welds, optional electro-polish.
Handhold Covers: Standard on series 216, 237, and 363, cannot be opened when container is under pressure. Cover is quick-release design and high sanitary.
Top head connections: All types are possible, standard is a over-presure connection and either quick-connect gas connection or NPT nipple to attach any other fitting type.
Top & Bottom: Features our unique 100% deep-drawn, easy to clean Top and Bottom.
Working Pressures: Maximum 29 to 87 psi (depends on container see chart)
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
TOTE BIN - Standardized sized IBC for Liquids Handling
The TOTE BIN - standardized sized IBC for liquids handling
Our Tote Bin Container is produced to the exact same specifications as standard Totes in used around the United States, Mexico and Canada. Our quality is superior and our price is highly competitive! We offer two standard sizes: 350 & 550 Gallon and can customize each as required.
Application:
Transport and storage of liquid materials for the food, chemical, paint, plastics and food industries.
Capacity:
350 to 550 Gallons / 1324 to 2,081 liters
Materials:
Product Contacting: 304, 316 or 316L
Frame: 304 stainless
* Other materials available upon request
Finish: Interior standard IIB optional polish up to high mirror. Exterior with cleaned welds and strip polished, optional polish up to high mirror. With flush ground welds All finishes can be certified.
Manway: Standard manways 22.5" with threaded sanitary vent cap in the center of the cover. Locking ring included.
Top Head Connections: Standard 2" Tri-Sure vent cap installed in top of body. We can supply any Vent, Tri-Clamp, or Quick-Connection ports you require.
Bottom: Sloped bottom for optimal discharge of free flowing liquids. With 2" elbow, nipple and 316 stainless steel ball valve. Other valves and flanges outlets are available upon request. Ball valve and outlet are protected from forklift damage by a welded sheet guard running between the front and rear legs.
Handling: 2 way forklift handling. Stack-able guide top corners and Crane lift lugs
Approvals:
In accordance with UN/DOT UN31A, ADR, RID and IMDG codes. Chapter 6.5 for public roads transport in Groups II & III (European and North American transport codes)
VISIT OUR STAINLESS CONTAINER SYSTEMS COMPANY FOR MORE INFORMATION
